[ORDER] Triple Function Generator
Category: Unknown · Tags: — · Posts: 82
#1 — reverselandfill · 2019-07-18
The Triple Function Generator Project
This module is based on schematics by D.Sandin & L.Larsen
I picked up this project because the pcb’s are not available anymore.
The Function Generator is a very useful module to have in a (DIY) video setup.
You can adjust the “Lights” , “Mids” and “Darks” in the input signal.
Effectively it works a bit like an equalizer, but you can also go negative. This will get you solarised effects.
I setup the design to work as a triple colorizer, as the Cadet system has black & white video input.
With this module, you can easily recolor the incoming images.
The inputs can be normalled together to achieve this. (there are connection pads on the pcb’s)
Feedbacking this and through other modules will also give cool results! — hint: more on this later
pcb & panel images:
The panel is made of pcb material and is 14HP wide.
I have 7 sets available now. I have ordered more. >status: shipped
note: It looks like I made a small error with the panel holes
If you use inserts it won’t fit . damn.
I’ll make new panels and use these instead.
If you use sliding nuts there is no problem though.Please reply with what you want to order.
I’ll make a list.
Prices: (ex shipping)
Full PCB SET (3x PCB + Panel) : 48,- euro
Single PCB (1x PCB): 12,- euro
Full kit: 110,- euro.
Build unit: I might do one. PM me
Flat rate shipping is 9,- euro for EU and international, 6,- euro for NL
> status updates> > date 12-08-19:>>>> kits: ready!>>>> new panel: ready!>>>> main pcb’s: ready!
BOM is here: refresh page if you don’t see it, or click ‘Download BOM’ . buildguide later.
https://www.reverselandfill.org/diy/triple-function-generator-project/Link: Triple Function Generator – Reverselandfill
Build Thread:
Let’s continue this here:
I’ve posted the BOM there too. [/forum/
I’ll contact the first eight about the orders…
The rest I’ll keep updated on when the next batch arrives.
Order list1: Agawell: Full PCB set → payed and shipped2: gosseyn: single PCB → payed and shipped3: csboling: Full PCB set → payed and shipped
4: sean: kit → payed
5: 743v04: Full kit → payed 6: xrs: Full PCB set → payed and shipped7: SOFEX: Full PCB set → payed and picked up8: mwmw: Full PCB set → payed and shipped9: Genlok: Full PCB set -payed & shipped
10: Resonant_Space: Full PCB set -payed
11: synlog: full kit -contacted
12: brknfixie: Full PCB set -payed
13: av_cinema: Full PCB set -contacted
14: VanTa: Full kit -payed
-15: Marizu : Full PCB set -payed 16: hdd: Full PCB set -payed & shipped17: rossgrady : Full PCB set -payed & shipped18: fluxmonkey : Full PCB set -payed & shipped
19: TomTones(@muff): 3x pcb no panel - contacted
20: otoskope: Full PCB set -contacted
21: Analogmonster: Full PCB set -contacted 22: pathein(@muff): Full PCB set -payed & shipped
23: aladan: Full PCB set -payed 24: perdex: Full PCB set -payed payed & shipped
25: Whelm: Full PCB set -payed 26: aaronsbrown: Full PCB set -payed & shipped
#2 — Agawell · 2019-07-18
Hi Martijn
I’ll take a Full PCB set please
cheers
Jim
#3 — gosseyn · 2019-07-18
Hi,
I’ll take a single PCB if that’s ok. I’ll understand if you’d rather sell full sets first. Thanks for your work on this.
Damien
#4 — csboling · 2019-07-18
I’ll also definitely take a full PCB set! Super excited to have a chance to get some function generators since I missed the last PCB runs. Thank you for all your awesome contributions to the DIY video synth tradition!
#5 — sean · 2019-07-18
Definitely interested in a full set. Probably the full kit, if the price stays around what you are predicting, but at least the full PCBs + panel. Thanks!
#6 — 743v04 · 2019-07-19
I’ll take a full kit please!
#7 — xrs · 2019-07-19
Please put me down for a full PCB set.
#8 — SOFEX · 2019-07-19
I’d like a full PCB set, thanks!
#9 — mwmw · 2019-07-19
Full PCB set please Martijn. Great work on this project!
#10 — reverselandfill · 2019-07-19
The BOM is up on my site.
I’ve added the total parts of the 3 pcbs.
for the prototype I used a multicable for power. That might be the best solution.
I will include it in the kit.
You can also power it with 3 separate cables.
note: i’ve just ordered more pcb’s
#11 — Genlok · 2019-07-19
I would like the 3 PCB + panel set!
#12 — Resonant_Space · 2019-07-19
Would like a full pcb+panel set. Thanks.
#13 — synlog · 2019-07-19
I want a full kit. Thank you.
#14 — brknfixie · 2019-07-20
Looks great - A Full PCB + Panel Set please
Shipping to Australia
#15 — VanTa · 2019-07-22
Awesome!
Full kit for me please
#16 — Marizu · 2019-07-22
Hi. I’d like a full set, please (3 pcb’s and a panel).
Thank you.
#17 — hdd · 2019-07-22
HI,
I’m interested in a full PCB set.
Cheers,
François
#18 — Agawell · 2019-07-22
Hey Martijn
consider yourself PM’ed
Jim
#19 — fluxmonkey · 2019-07-24
I’d like one full set, shipping to US. THANKS
bbob
#20 — otoskope · 2019-07-25
I’d like to order a full set (pcbs+panel), shipping to Sweden. I might also join in on the group buy from your other thread. Looking up my needs right now.
Best,
Palle
#21 — Analogmonster · 2019-07-25
I would also like a full pcb set please, uk shipping
#22 — reverselandfill · 2019-07-25
I have discovered (thanks to Agawell) that there is a small issue with the panel mounting holes.
If you use inserts it won’t fit . damn. by 0.5HP If you use sliding nuts there is no problem though.I’ll make new panels and keep you updated.
to the first group: if you need a new panel please contact me.
#23 — Agawell · 2019-07-25
I’ll take a new panel please Martijn
no rush though I need the lm6172s before I can build it!
#24 — reverselandfill · 2019-07-30
The new panels are ordered
#25 — cobypear · 2019-08-01
Anybody willing to mule one to the US for me heh?
Oh i didn’t understand the post, I thought you weren’t shipping outside of the EU.
I would take a full kit.
#26 — reverselandfill · 2019-08-01
what do you mean?
I could ship 2 pcb sets in one package. if you know someone living near you.
#27 — reverselandfill · 2019-08-02
update: the kits from the first batch are ready, except for the new panel, which is in production now
note: these are the biggest kits I have ever done
fat packs!
#28 — perdex · 2019-08-08
I would like the 3 PCB + panel set!
#29 — Whelm · 2019-08-09
I’d love a PCB Set, shipped to Canada.
#30 — aaronsbrown · 2019-08-11
Hi. I’m in for a Full PCB Set if possible, shipping to US. Thanks!
#31 — reverselandfill · 2019-08-11
I’ve added you to the list. Thanks!
#32 — reverselandfill · 2019-08-12
the panels are in!
small note: there is a small identification number on the panel, bottom left. sorry about this.
I’ll contact everybody on the list
If any of you also joined in with the LM6172 groupbuy, it will take a bit longer as I have to collect all the funds and order + receive the IC’s
This friday I am going on a holiday to Italy. I do hope to send out some of the packages this week.
#33 — tronotape · 2019-08-16
A little late to the party but I would like to throw myself on the list for 1 pcb/panel if available.
#34 — reverselandfill · 2019-08-16
I’ll pick up on the orders in 2 weeks. I’m going on a holiday tomorrow !
#35 — tronotape · 2019-08-16
Awesome, thank you and have a good holiday!
#36 — cobypear · 2019-08-16
I think i misunderstood the op. I’ll take a full kit shipped to the US when available!
#37 — dondon · 2019-08-21
I’m really late, but would love a full PCB Set please!
#38 — northerntao · 2019-08-22
If it’s not too late, I’ll take a full kit.
#39 — rempesm · 2019-08-26
I’d be down for a full kit with shipping to the US if one is still available.
#40 — Genlok · 2019-08-29
Mine was received this week. Thanks!
#41 — reverselandfill · 2019-08-30
I can’t seem to edit the first post anymore, so I will continue it here:
Order list
batch 1: 1: Agawell: Full PCB set -> payed and shipped2: gosseyn: single PCB -> payed and shipped3: csboling: Full PCB set -> payed and shipped4: sean: kit -> payed and shipped5: 743v04: Full kit -> payed and shipped6: xrs: Full PCB set -> payed and shipped7: SOFEX: Full PCB set -> payed and picked up8: mwmw: Full PCB set -> payed and shipped
batch 2: 9: Genlok: Full PCB set -payed & shipped10: Resonant_Space: Full PCB set - shipped11: synlog: full kit -payed and shipped12: brknfixie: Full PCB set -shipped13: av_cinema: Full PCB set -shipped14: VanTa: Full kit -payed and shipped15: Marizu : Full PCB set -payed and shipped16: hdd: Full PCB set -payed & shipped17: rossgrady : Full PCB set -payed & shipped18: fluxmonkey : Full PCB set -payed & shipped19: TomTones(@muff): 3x pcb no panel - shipped20: otoskope: Full PCB set -shipped21: Analogmonster: Full PCB set -payed and shipped22: pathein(@muff): Full PCB set -payed & shipped23: aladan: Full PCB set -shipped24: perdex: Full PCB set -payed payed & shipped25: Whelm: Full PCB set -shipped26: aaronsbrown: Full PCB set -payed & shipped27: dondon: Full PCB set - shipped28: northerntao: Full kit - payed and shipped29: rempesm: Full kit - payed & shipped30: Tronotape: Full PCB set: payed & shipped---------------------------------------
batch 3:
1: 337is: 2x kit
2: addamm: Full PCB set + extra’s
3: copbypear: Full kit
4: Kharmasabits: Full PCB set
5: visual_lies: Full PCB set
6: Luix: Full kit
#42 — addamm · 2019-08-30
You can put me down for a pcb+panel set. We spoke in a PM (or maybe email?)- I’m happy to wait for the LM6172s and maybe a matrix mixer pcb/panel set should that become available and consolidate everything together. No hurry on my end!
#43 — reverselandfill · 2019-08-30
ok I have 1 set for you reserved. (and ready)
I’ll order new ones soon-ish
#44 — tronotape · 2019-09-02
Jut wanted to double check you got me on the list for a pcb/panel. Thanks.
#45 — reverselandfill · 2019-09-02
Officially you were in before addamm, so I guess so . @addamm: are you ok with this? The new pcb’s will be ordered soon, and then I’ll make a package for you with the matrix mixer
#46 — reverselandfill · 2019-09-02
@tronotape: the panel is for 3 pcb’s
@cobypear: are you ok with being on the next batch?
– as for this hassle: I’m moving to Italy for a year, and leave in a month. This means chaos in my head (more than usual) so sorry for the mixups. I’m doing the best I can.
#47 — tronotape · 2019-09-02
Hey,
I am super flexible so as long as I can eventually grab a set whatever is easiest for you is fine with me.
#48 — cobypear · 2019-09-03
@reverselandfill Yes, works for me!
#49 — addamm · 2019-09-03
For sure - I have no problem waiting for the next batch. Happy to wait to get everything shipped at once or whatever is convenient on your end.
#50 — hdd · 2019-09-04
Hi, packaging has been well received and everything looks perfect !
I’m wondering if anyone that has one finished can post it to modular grid ?
Is there any idea about cosumption can we consider +12 75 mA and -12 75 mA ?
#51 — Kharmasabits · 2019-09-04
I’d like to be added to the list for a full pcb set! Thanks!
#52 — visual_lies · 2019-09-04
I would like to order a full set as well.
#53 — reverselandfill · 2019-09-10
update:
new pcb’s and panels are ordered today.
#54 — reverselandfill · 2019-09-10
Most PCB sets are shipped!
@analogmonster : please send me your address info!
#55 — reverselandfill · 2019-09-10
Most kits are shipped.
Note: I’ve tried my best assembling the kits. If somehow I missed something please contact me
#56 — Resonant_Space · 2019-09-10
Thanks Martijn! Appreciate your work on the project and putting together the LM6172 group buy.
#57 — reverselandfill · 2019-09-11
update:
the new pcb’s are in production
#58 — VanTa · 2019-09-13
And that’s how my weekend starts…
Thaaaaanks
#59 — reverselandfill · 2019-09-13
cool!!
If you have questions about the build , ask 'm in the buildthread
I’ll try to answer asap
- or others maybe can help too!>> Project description: > I want to make a Triple Function generator based on the Sandin/LZX design. > The function generator is very cool if you use it to re-colorise the B/W Luma input . > Especially with camera feedback, this gives very beautiful results. > Each generator stage can be used individually too. > Features: >> 3x shaper for re-colorizing the B/W Luma video input and other processing> normalised inputs>> Options: >> extra gain & span pots? See Grant Richters adapted schematic below - to be tes…>
#60 — reverselandfill · 2019-09-16
update: the pcb’s are shipped to me
#61 — luix · 2019-09-16
I want one! Im still on time to get a spare full kit?
#62 — transistorcat · 2019-09-17
Same here, if there are still kits (Alternately, a full set will also work if the kits are all gone)
#63 — reverselandfill · 2019-09-17
batch 3:1: 337is: 2x kit - shipped2: addamm: Full PCB set + extra’s - shipped3: copbypear: Full kit - shipped4: Kharmasabits: Full PCB set - shipped5: visual_lies: Full PCB set -shipped6: Luix: Full kit -shipped7: transistorcat: Full kit -shipped8: spar: Full kit - shipped
#64 — reverselandfill · 2019-09-19
The kits are almost ready. Just have to make the power cables now
(and wait for the pcb’s to arrive)
#65 — reverselandfill · 2019-09-23
The pcb’s and panels are in!
everybody is contacted!
#66 — spar · 2019-09-23
Can i please order a kit. thx!
#67 — reverselandfill · 2019-09-24
you are on the list. - you got the last full kit!
note: I only have partial kits in stock now (without pots)
#68 — wednesdayayay · 2019-09-24
still for sure in for a prebuilt unit if it becomes an option
#69 — reverselandfill · 2019-09-24
I can build you one. I’ll contact you in october after I moved to Italy
#70 — reverselandfill · 2019-09-30
everything is shipped.
stock:
9x pcb’s & panel sets
2x partial kits
#71 — 337is · 2019-10-01
Mine arrived here in New York yesterday. Thank you so much for putting this together. I’m eager to build them and get them in my system.
#72 — spar · 2019-10-02
just got mine too, thanks again!
#73 — addamm · 2019-10-03
Got mine too
Anyone in the US have a good source for the right angle pots? If not, Thonk it is!
#74 — csboling · 2019-10-03
I spent a better part of a day trying to track down a place that had them in stock when I was sourcing parts for my Cadet/Castle system, and wound up buying a grip from Small Bear Electronics. Used the last ones building my Triple Function Generator in fact!
#75 — addamm · 2019-10-03
Good call. I’ve used small bear in the past for oddball stuff.
#76 — VisibleSignals · 2019-10-04
Received my kit (here in the Antipodes) in the mail today, along with some tasty LM7162s. Thank you reverselandfill!
#77 — GijsvO · 2019-10-25
I would like to order a full kit, but I take it they’re out of stock. If the partial kit is only missing the pots, then that would be okay too.
#78 — reverselandfill · 2019-10-25
I have 1 almost full kit available. Just the knobs are missing. (the pots have a round shaft, 6.35mm)
I’ll PM you with the details
#79 — reverselandfill · 2019-10-28
I have 1 build module in stock now. PM me for details
#80 — Fallinggirl · 2021-05-01
All hail Reverselandfill. I LOVE the Triple Function Generator. If you’re interested here is a video where I’m primarily using the Triple Function Generator: https://youtu.be/M8cD7sS2cq8
#81 — Rik_bS · 2021-05-01
Oh yeah, TFG and Matrix Mixer are slowly moving up the priority list as I work my way through a backlog of DIY builds…
Looking forward to the processing and colourisation options they’ll add to the rack
#82 — wednesdayayay · 2021-05-01
the matrix mixer is so good
I love function gens so I’m sure the triple is good fun.
I just don’t want to make room for them in my system currently. I’ve tried to strip just about everything away that I wasn’t using regularly.