Not able to see programs loaded into SD_CARD, on Videomancer
Category: Helpdesk · Tags: — · Posts: 2
#1 — beatronic_music · 2026-04-10
Hi,
I tried to load new programs to my videomancer with my SD-Card but it does not show up in the Programs directory of the videomancer.
The SD-CARD is formatted as FAT32 and I dropped the .vmprog into it.
Anyone who has the same issue?
Thanks for helping!!
#2 — claytron · 2026-04-13
You might have to enable the developer mode if the program isn’t 1.x versioned.
docs.lzxindustries.nethttps://docs.lzxindustries.net/docs/instruments/videomancer/user-manual#developer-modeVideomancer is a standalone instrument and development platform for video synthesis. Its open source hybrid digital/analog architecture leverages the best of both domains. With a full complement of inputs and outputs for every signal type, it...
Link: Developer Mode - User Manual | LZX Technical Manual
Not sure when that was introduced, so might have to use the latest 1.0 firmware rc release:
https://github.com/lzxindustries/videomancer-firmware/tagsFirmware binaries for the LZX Industries Videomancer device. - Tags · lzxindustries/videomancer-firmware
Link: Tags · lzxindustries/videomancer-firmware
I was testing with 1.0.0-rc.13 yesterday and it was working well.