Bibliography (informative)
These sources explain or justify EIS; none is normative. This repository stores no third-party document: data/sources.json records the URL, the retrieval date, and, where one was taken, the SHA-256 of each source it cites. The reference repository does the same for the survey and the catalog sections.
| Source | Use in EIS |
|---|---|
| nVent Schroff EuropacPRO catalog, December 2025, threaded inserts p. 6.37, front rails pp. 6.26 to 6.32, collar screws p. 6.74 | Evidence for the 5.0 mm × 2.0 mm M3 insert section and tap drill; the L-KD, L-OD, and H-KD sections in the catalog rail sections and H-LD in the rejected catalog rails |
| IEC 60297-3-100:2008 and IEC 60297-3-101:2004 public preview pages (IEC samples) | The front panel, flange and slot figures of 5.1, read from the publications' own Figure 2, Table 1, Figure 3 and Figure 5 |
| nVent Schroff standards summary | Transcription of the IEC 60297-3-100 rack mounting grid (465.1 mm centers, 12.7 mm and 31.75 mm steps) in 5.1, beyond the public preview |
| TraceParts solid of Schroff 34560-184 | Measured L-KD section, insert seat, and end machining (the catalog rail sections) |
| Vector Electronics drawing 5280006, T-strut | Collected rail section; T-slot dimensions; the lower rail limits |
| Gie-Tec Trägerprofil sheet 2.5 and accessory sheet 2.18 | Collected rail section and the M3 insert 138049 in the Doepfer A-100 frame |
| HEITEC horizontal rail page (3684.562, 9908.721); Verotec KM6-RF front extrusions; Tiptop Audio Z-rail data sheet | The catalog rail sections in eis-reference |
| Doepfer pages restating A-100 conventions; Intellijel 1U technical specifications; Hinton Instruments, Power Distribution | Listed with retrieval dates under inherited conventions |
| Doepfer, A-100 short-form manual 2026, retrieved 2026-10-14 | The keying of shrouded bus headers (6.4) |
| LZX Industries, Eurorack module depth survey and flight-case sample, 2026-09 | Module depths in survey/module-depths.json; the eis-reference survey |
| LZX Industries, Eurorack module power survey, 2026-09-30 | Module widths and current draws in survey/module-power.json |
| LZX Industries, Eurorack power supply and bus board survey, 2026-09-30 | Bus boards and supplies in survey/ |
| LZX Industries, Eurorack case catalog, maker pages checked 2026-09-26 | Commercial case depths in survey/cases.json |
| Mean Well RT-65B and GST series datasheets, retrieved 2026-10-16 | Ripple ratings of common Eurorack and desktop supplies, behind the 150 mV ripple limit (6.2) |
| JST VH, Kycon KPJX/KPPX, and Molex Mini-Fit Jr PS-5556 product specifications | Reference parts for the multi-pin DC entries (8.1) |
| Hinton Instruments, Power Cables, retrieved 2026-10-24 | The 30 mΩ contact resistance of a 0.1 in Eurorack header contact, behind the 0 V of a power ribbon (6.5) |
| Keystone 7795, 7794, and 7769 M4 screw terminals; Würth Elektronik REDCUBE terminals, distributor listings, retrieved 2026-10-24 | Example M4 row wiring terminals and their 15 A ratings (6.1) |
| ASTM B258, standard nominal diameters and cross-sectional areas of AWG sizes | The copper resistance per meter behind the row wiring table (6.1) |
| 3M 3365 series ribbon cable, distributor listings, retrieved 2026-10-19 | The 28 AWG conductor of standard 1.27 mm pitch ribbon behind BUS-015 (6.5) |
| Same Sky PJ-002A and PJ-002AH data sheets, retrieved 2026-10-19 and 2026-10-25 | The 2.5 A and 5 A ratings of through-hole jacks for a 2.1 mm plug, whose pin is 2.0 mm (8.1) |
| DIN 562 square thin nuts | M2.5 slide nut inside the recommended section; M3 nut too wide (the insert catalog) |
| apra 19-inch catalog, rail 241-022; Vector groove nut NT4-7PA; No. 43 twist drill | M2.5 and #4-40 subrack hardware in the eis-reference insert catalog |
| SMPTE ST 293:2003; ITU-R BT.1358-1 (2007) | The production systems 480p59.94 and 576p50 descend from; the rows of 8.3 are CTA-861's rasters |
| ITU-R BT.1700; EIA/CEA-770.1, 770.2, and 770.3, analog component video interfaces; IEC 60933-5, the 4-pin mini-DIN Y/C interface; VESA DMT; SMPTE ST 259, ST 292, ST 424, ST 2081, and ST 2082 | External video ports named in the informative port vocabulary, Annex C |
| MIDI 1.0; MIDI Association CA-033 (RP-054), TRS adapter specification; ANSI E1.11 and E1.27-2; AES11 | Control, data, and clock ports named in Annex C |
| IEC 60958-3 (S/PDIF); AES3; IEC 61938 (phantom power) | Digital audio and phantom power named in Annex C |
| ILDA ISP-DB25 | The laser port named in Annex C |
| IEC 62368-1, protective bonding resistance; IEC 61000-4-2, contact discharge | The 100 mΩ pass mark of GND-004 and the static case behind it (6.3) |
| MIL-DTL-5541 (chromate conversion coatings, class 3); MIL-A-8625 (anodic coatings); IPC-4552 (ENIG) | The finish classes of the chassis-continuity table (6.3) |
| LZX Industries, chassis bonding model, 2026-10-24 | Which surfaces conduct under a fastener, and six case types solved for the resistance from the tie to every part |