Reference Manual
Color Video Encoder
Technical documentation, setup guidance, and patching workflows.
← Back to Color Video Encoder overviewColor Video Encoder Reference
Archived product-library reference assembled from LZX library content for this legacy module.
At a Glance
- Module: RGB to NTSC/PAL video encoder, clipping and blanking of input signals, RGB contrast, brightness and inversion processing
- Archive inventory: 1 files
Overview
Color Video Encoder is one of two required modules in the LZX Visionary system, and serves as the system’s primary Composite NTSC/PAL video output. Any signal type, whether video, audio, control voltages, or logic signals, can be input and encoded into stable, viewable video at Color Video Encoder’s output. Color Video Encoder requires connection to a Video Sync generator module in order to function. Multiple Color Video Encoders can be included in a single system.
COLOR CHANNEL INPUTS Red, Green and Blue color channel inputs are processed by level and inversion controls and then summed with a variable -1 to 1 Volt bias control. The resulting voltages are clipped and blanked before being encoded into the Composite video signal to control the brightness of the associated color.
VIDEO OUTPUTS Three independently buffered video outputs, two Composite and one S-Video, can be connected directly to display or recording devices as desired.
Specifications
| Spec | Value |
|---|---|
| Width | 10 HP |
| +12V Current | 90 mA |
| -12V Current | 60 mA |
| +5V Current | 0 mA |
| MSRP | $379 |
Product Library Archive
1 product-library asset are attached to this module. 1 remain indexed-only source assets.
- Metadata — Modulargrid · Indexed only
Browse the complete archive inventory.
Additional References
External references remain available when you need the original off-site documentation or catalog entry.