videomancer beta program

Archived RC: 1.0.0-rc.41

PAL dual 576i passthru fix (ADV7181 CP + RTL sync delay); flash rc.41 UF2 and verify PAL/NTSC dual analog loops and program pack install

Before you test

Install LZX Connect 1.3.5 and enable Show pre-release firmware
Flash 1.0.0-rc.41 (Connect update or .uf2 from Downloads)
Confirm 1.0.0-rc.41 on the SYSTEM screen
Dual-capable cable set: HDMI in + Analog Out looped to Analog In (YPbPr and RGB 1V as needed); PAL-capable source for 576i tests

PAL dual — 576i passthru color bars
high
1. Routing = Dual; Analog Out/In = YPbPr. 2. HDMI source at 576i50 (or PAL interlaced equivalent). 3. Select Passthru; confirm lock and usable color bars on output.
Pass: Picture locks; no solid wrong-color field or horizontal banding vs rc.40 PAL dual failure mode.
NTSC dual — 480i passthru regression
high
1. Routing = Dual; YPbPr loop. 2. HDMI source at 480i60; Passthru color bars.
Pass: Same usable picture as rc.40; no new unlock or level regression.
Program library — signed pack install
medium
1. After rc.41 flash, install or refresh official program pack via Connect. 2. Load a non-passthru program (e.g. colorbars standalone).
Pass: Pack installs cleanly; programs load without signature or comm errors.