videomancer beta program

Archived RC: 1.0.0-rc.52

ADV7181C program-reload reset + multi-modulator FPGA sync; MCU-only vs rc.48

Before you test

Analog In program change — YPbPr 1080p → HDMI (itchaboo repro)
high
1. Routing = Analog In; Analog In = YPbPr; lock 1080p30 from ESG3. 2. HDMI → TV; change embedded programs without power cycle. 3. Serial: fsm: ADV7181C reload hold → release → adv7181c: configure before fpga: program loaded, then video_output: configure.
Pass: HDMI recovers after every program change; no reboot required.
Composite program change — Dual / Analog RGB 1V PAL
high
1. Routing = Dual In (repeat with Analog In). 2. Analog In = RGB 1V; lock 576i PAL; CVBS out → CRT or TBC2. 3. Change embedded programs without power cycle. 4. Serial: post-load analog=0, then VSYNC analog=1 with ADV7393 sync lock.
Pass: CVBS recovers after every program change; no power cycle required.
Mixed per-line audio + fader Free LFO (kintsugi repro)
high
1. Load kintsugi at 1080i59; P1 → Audio Input (per-line OK). 2. P12 fader → Free LFO; confirm meter moves and video Mix responds. 3. Cycle Free LFO → Disabled → Free LFO; move physical fader.
Pass: Video tracks modulation without reboot; see multi_modulator_fpga_sync.md.
rc.51 regression — HDMI CSC + HD embedded
high
1. Repeat rc.48 Colorbars YUV HDMI checks (NTSC, 480p, 720p60, 1080i59). 2. Load Moire / Lumarian / Passthru at 720p60 embedded.
Pass: No regression vs rc.51 on HDMI or HD embedded paths.