videomancer beta program

Archived RC: 1.0.0-rc.60

Analog In PAL HDMI lock (576i) with centered picture; NTSC HDMI and PAL CVBS must not regress

Before you test

Analog In PAL — HDMI 576i lock and centering
high
1. Routing = Analog In; PAL composite into VM; Passthru. 2. HDMI out to a 576i-capable sink; also watch CVBS. 3. Confirm the sink locks (not "no signal"), picture is centered, and there is no green sliver on the left edge.
Pass: HDMI shows 576i with a centered picture and no left-edge green; CVBS stays in color.
Analog In NTSC — HDMI / CVBS vs rc.59
high
1. Analog In composite NTSC → Passthru → HDMI + CVBS.
Pass: No regression vs rc.59 on color, interlace, or left edge.
Analog In YPbPr — program change at 720p and 1080p
medium
1. Routing = Analog In; ESG3 (or equivalent) YPbPr into VM. 2. Switch programs at 1080p and 720p without touching cables.
Pass: Output recovers after each program change; no cable reseat required.
HDMI In / Dual In program change
medium
1. HDMI In 720p/1080p program change. 2. Dual In loopback program change.
Pass: No regression vs rc.59 (must stay working).