videomancer beta program

Archived RC: 1.0.0-rc.61

Analog In RGB 1V + external sync → RGB out recovers after program change without power cycle

Before you test

Analog In 1V RGB + ext sync → RGB out program change
high
1. Routing = Analog In; Analog In Mode = RGB 1V; Analog Out = RGB. 2. Patch 1V RGB in and 1V RGB out. Sync only: Analog Y and/or SYNC In/Out. No YPbPr RCA video, no HDMI In. 3. Confirm picture + Sync Out after boot (Passthru). 4. Switch programs (Passthru, Colorbars, Bitcullis, others) without touching cables or power-cycling.
Pass: 1V RGB and Sync Out recover after every program change; no power cycle; no cable reseat.
Analog In YPbPr — program change at 720p and 1080p
medium
1. Routing = Analog In; ESG3 (or equivalent) YPbPr into VM. 2. Switch programs at 1080p and 720p without touching cables.
Pass: Output recovers after each program change; no cable reseat required.
Analog In PAL / NTSC HDMI vs rc.60
medium
1. Analog In PAL composite → Passthru → HDMI (576i lock, centered, no left-edge green) + CVBS color. 2. Analog In NTSC composite → Passthru → HDMI + CVBS vs rc.60.
Pass: No regression vs rc.60 on PAL lock/centering or NTSC HDMI/CVBS.
HDMI In / Dual In program change
medium
1. HDMI In 720p/1080p program change. 2. Dual In loopback program change.
Pass: No regression vs rc.60 (must stay working).