videomancer beta program

Before you test

• Flash 1.0.0-rc.64 UF2 (full image)
• Official 1.0.8-rc.1 and community 1.0.6-rc.1 already installed is fine

Testing goals

• Panel stays live after the splash

  high

  1. Flash 1.0.0-rc.64 and power on. 2. Turn one knob while the splash is on screen. 3. After the splash, turn that knob and a different one, and press a button.

  Pass: The knob moved during boot shows, and later knob and button changes still update the LCD.

• Boot with power and USB only

  high

  1. No SD card. No HDMI or analog cables. 2. Power on and wait for the splash to finish.

  Pass: Knobs and buttons respond. The LCD is not stuck on the splash parameter.

• Picture after boot

  medium

  1. After a normal boot, connect HDMI or analog out with Passthru loaded.

  Pass: A picture comes up. Sync is not left masked after the boot probe.

• rc.63 video path

  medium

  1. Analog In composite and YPbPr on the shared Y jack, one switch each way.

  Pass: Picture returns after the switch. No stuck black frame.

Report feedback