videomancer beta program

Before you test

• Flash 1.0.0-rc.66 UF2 (full image)
• Official 1.0.8-rc.1 and community 1.0.6-rc.1 already installed is fine

Testing goals

• Program list works with no video lock

  high

  1. No SD card. No HDMI or analog cables. Routing is HDMI or analog, not standalone. 2. Power on and wait for the splash to finish. 3. Press System. Turn the encoder to another embedded program and confirm.

  Pass: The program list moves. The chosen program loads. The panel does not ignore the System button and encoder.

• LCD leaves the splash parameter after restart

  high

  1. No SD card. No HDMI or analog cables. 2. Power on and wait for the splash to finish. 3. Note the parameter on the LCD, then turn a knob a long way.

  Pass: The LCD leaves the parameter it showed at the end of the splash. Slot, name, or value changes with the knob.

• Picture after boot

  medium

  1. After a normal boot, connect HDMI or analog out with Passthru loaded.

  Pass: A picture comes up. Sync is not left masked after the boot probe.

Report feedback