Diver

Overview

A new concept in pattern generation for video synthesizers. Diver is a single axis waveform sampler, ramps generator and digital effects buffer which translates audio signals to the 2D space of the analog video frame. Add scrolling motion to your patches and transform any audio source into a powerful shape generator.

On the product hub

Open the Specs tab for the full connector list, control definitions, and feature bullets (synced from the LZX knowledge base). Use Overview for commerce copy and the Support tab for triage and community links.

Power and size (summary)

16 HP · +12V @ 80 mA, -12V @ 10 mA. Mounting depth (reference): 32 mm.

Firmware update

Use LZX Connect on Windows, macOS, or Linux to install the latest Diver MCU firmware.

Requirements

Diver module
PC with LZX Connect installed
USB Mini-B cable

Procedure

Remove Diver from your Eurorack case and disconnect DC power.
Connect USB Mini-B from the rear of the module to a powered USB port on your computer.
Open LZX Connect → Firmware Update → Eurorack modules (STM32 DFU).
Select Diver from the module list (required — STM32 bootloader USB IDs are shared across Orion modules).
When the device is detected, click Check for Updates and Download & Flash.
On Windows, install the WinUSB driver once via Zadig if prompted.
Disconnect USB, reinstall the module, and restore Eurorack power.

Firmware downloads are also available from the product Downloads page. WebDFU remains a fallback if LZX Connect is unavailable.